Setting Support; Scoop Function - Marquardt Just Drive Comfort 4313 Serie Inhaltsempfehlung Für Bedienungsanleitungen

6.2.2

Setting support

The electric motor of your pedelec supports your pedaling power. Several support levels are
available. You can also drive without motor assistance.
You can see the active level from the bright segments of the support display on the main page
of the Comfort control unit.
Level
None
1-5
Enable support
Increasing support
Reducing support
Driving without assistance
6.2.3

Scoop function

The scoop function is available for starting or pushing the wheel. The drive of the pedelec sup-
ports the movement of the wheel. The scoop function can be activated up to a speed of < 6
km/h.
You use the scoop function when sliding the wheel, when starting off or when assisted starting
on a hill. If you push the wheel, you move beside the wheel. Use the scoop function as a start-
ing aid when sitting on the bike.
14
You set the support levels on the Comfort control unit (T4 / T2).

The current support level indicates Comfort with a scale.

The selected level is immediately effective.

Description
Normal cycling conditions. Motor inactive.
Different intesities of motor support.
The display shows no support level.

1. Press the T4 key on the Comfort control unit.
The electric motor supports the drive.

The first segment is shown in the support display.

1. Press the T4 key. You switch to the next higher level.
The electric motor provides more support to the drive.

Further segments are displayed in the support display.

1. Press the T2 key.
The electric motor is less supportive.

In the support display, the number of segments displayed decreases.

1. Press the T2 key until no segment of the support display is visible.
You are driving without motor support.

Just Drive Comfort control unit for pedelecs and e-scooters