Airzone AZX6CCPWSCC Schnellinstallationsanleitung Seite 23

RadianT*
Mode Demand
Stop Off
Cooling Radiant
mode
Off
Heating Radiant
mode
Off
Dew warning On
active
Off
*Only for Airzone RadianT365 system (AZRA6).
Important: In order to optimize the production temperature of the aerothermal units, the following combinations will not
generate air demand in the production control board:
- Communication gateway (AZX6QADAPTxxx / AZX6QADAPT3xxx) in Flexa 3.0, Innobus Pro6, Acuazone and Innobus
Pro32 main control boards.
- Controller 3.0 gateway (AZX6GTC xxx) in Flexa 3.0, Innobus Pro6, Acuazone and Innobus Pro32 main control boards.
- Communication gateway for electromechanical units (AZX6ELECTROMEC) in Flexa 3.0, Innobus Pro6, Acuazone and
Innobus Pro32 main control boards.
- Infrared gateway module (AZDI6MCIFR [C/R]) in Acuazone e Innobus Pro32 systems (when configured as a zoning
system or mixed system).
- Gateway module (AZDI6MCIFR [C/R]) in Acuazone e Innobus Pro32 systems (when configured as a zoning system or
mixed system).
Important: To guarantee the optimization of the production temperature of the aerothermal units, these device combinations
do not generate radiant demand to the production control board:
- Zoning module for Electrical Heating Element (AZDI6MZSRE [C/R]) in Acuazone and Innobus Pro32 systems regardless
of the Main Control Board configuration.
SW2
To force the production control board to search for the connected systems and save the configuration of the installation, press
SW2.
Internet connection
To connect the webserver to internet to control Airzone systems through the Cloud
platform, must connect the device to the router through an ethernet cable.
FRIO_Y CALORB_W
-- --
ON --
-- --
-- ON
-- --
ON --
ON --
Control Relays
AIRE_Y RADIANTE_Y
-- --
-- ON
-- --
-- --
-- --
ON --
ON --
AIRE_W RADIANTE_W
-- --
-- --
-- --
-- ON
-- --
-- --
-- --
21
ES
EN
FR
IT
PT
DE