Radio Test - TECE RD 50112 KF Installationsanleitung

Radio test

1 minute, independent from the current state of operation.
The channel status changes after each pressing of the SET
button (toggle function). If the Thermostat Radio cannot
be assigned or if the assigned heating zone cannot be
switched during the radio test, the reception conditions
for the base are unfavourable. An external receiver can be
supplied optionally for this case.
Note: This test should only be performed after the Radio
Basis has performed the first-open function, when the
switch output is not active any more.
Set button
The
performed prior to the final wall
installation of the LCD Thermostat
Radio in order to exclude possible
sources of disturbance. Press the
SET button of the thermostat
in order to test the assignment
of the thermostats or the radio
transmission.
heating zone will be switched for
39
radio test
The
should be
assigned
DEU
ENG
DAN
NOR
SWE
FIN
FRA
ITA
NLD
SPA
RUS