NAIM UNITI Kurzanleitung Seite 4

NaimUniti Quick Start Guide
• If an Apple
(available separately) to the rear panel iPod interface. Do not use the front panel USB
socket to connect an iPod.
Note:
iPods and other MP3 players may also be connected to NaimUniti's front panel
analogue input using a 3.5mm stereo jack cable from their headphone sockets. Player
control via NaimUniti's user interface will not however be possible.
• If NaimUniti is to play audio files stored on a
the front panel USB socket. Some MP3 players (not iPod) may also be connected to
NaimUniti via the front panel USB socket.
2 Sw it c h in g On a nd ge tt i n g S t a rt ed
• Once all connections have been made, switch on NaimUniti using the rear panel
mains switch. NaimUniti will display a welcome screen and select its CD input.
Note:
If NaimUniti is left unused its display will switch off after a preset time. The "Auto-off"
time can be adjusted within the setup menus.
• The NaimUniti display language can be changed. Enter setup mode by pressing the
handset setup
down ( 6
selection. Leave setup mode by pressing the
• To play a
and place the CD on the platter. Place the magnetic puck on the central hub and
push the door closed. NaimUniti will automatically read the disc index when the CD
drawer is closed. If NaimUniti is set up to "auto-play", the CD will play immediately. If
not, press the front panel
be selected or deselected via a setup menu: Press the handset setup key (
setup mode then select
• To adjust NaimUniti volume use either the front panel
vol-
handset
of the display.
• To control the CD transport use the front panel stop, play,
handset transport keys (
3 Se l e c t i n g In p ut s
• NaimUniti inputs can be selected by pressing the front panel
up ( 5 ) and
• Pressing one of the handset
or scrolls through a group of inputs. For example, pressing the
CD input, while pressing the
DAB and
the Reference Manual. They can be modified via the Inputs setup menu: Press the
handset setup
Downloaded from www.Manualslib.com
iPod is to be used with NaimUniti, connect it using a Naim n-Link cable
( ) key, select the language option and use the handset
) keys to select the desired language. Press the
CD pull open the drawer using the handle on the left hand side of the unit
play button or handset
Inputs > CD > Auto
vol+
and keys. The numerical volume value is shown in the top left corner
down ( 6 ) keys or one of the handset
input selection
radio key scrolls through a group comprising the Fm,
iradio inputs. The default input selection
( ) key then select the
Full naimuniti installation and operational information can be found in the reference manual
available on line at www.naimaudio.com
manuals search engine
USB memory stick, insert the stick into
ok/list key to confirm the
exit key.
play/pause ( )key. Auto-play can
Play.
-vol vol+
and buttons or the
prev and next
).
input button, the handset
input selection keys.
keys either directly selects a single input
CD key selects the
key assignments are described in
Handset Buttons option.
English
Language
up ( 5 ) and
4English
Français
Deutsch
Italiano
CD
Name:
Input Trim:
Auto Select:
4Auto Play:
)to enter
buttons or the
Uniti Setup
Headphones
Network Settings
Front Display
4Handset Buttons
Inputs On:Radio
41. FM
2. DAB
3. iRadio
4. Unassigned
1/5
5/5
CD
0
Yes
Yes
7/8
1/4