3- and 2-way
mobile high end
loudspeaker system (8 Seiten)
Inhaltszusammenfassung für Audiotec Fischer MATCH UP C42MB-FRT
Seite 1
UP S4MB-CTR UP W8MB-S4 UP W8MB-S4 UP C42MB-FRT UP C42MB-FRT UP C42MB-FRT UP C42MB-FRT UP X4MB-FRT UP X4MB-FRT UP X4MB-FRT UP X4MB-FRT UP S4MB-SUR UP S4MB-SUR DSP amplifier UP C42MB-FRT / UP X4MB-FRT UP S4MB-SUR / UP S4MB-CTR UP W8MB-S4 UPGRADE Lautsprechersysteme für Mercedes-Fahrzeuge UPGRADE speaker systems for Mercedes vehicles...
Viel Freude an diesem Produkt wünscht Ihnen das nischen Erkenntnissen entwickelt und zeichnen Team von sich durch hervorragende Verarbeitung und über- zeugenden Klang aus. AUDIOTEC FISCHER Allgemeine Hinweise Allgemeine Hinweise zu den MATCH UPGRADE Allgemeine Hinweise zum Anschluss von Lautsprechersystemen für Mercedes-Fahrzeuge MATCH Lautsprechersystemen Die MATCH UPGRADE Lautsprechersysteme für...
Seite 3
Abmessungen UP S4MB-FRT: UP S1MB-FRT: UP X4MB-FRT: UP S4MB-SUR: *Alle Abmessungen in mm...
Seite 4
Abmessungen UP S4MB-CTR: UP W8MB-S4: Links Rechts *Alle Abmessungen in mm...
Installation Türverkleidung / hintere Seitenverkleidung / Hochtöners verändert werden. Center-Schutzabdeckung entfernen 0 dB: Der Hochtöner wird mit dem für die Zur Montage der Lautsprecher in die Originalein- meisten Anwendungsfälle optimalen Pegel baupositionen muss die Türverkleidung / hintere angesteuert. Seitenverkleidung / die Schutzabdeckung des Cen- -3 dB: Der Lautstärkepegel des Hochtöners wird ter-Lautsprechers entfernt werden.
Seite 6
Installation Montage des UP X4MB-FRT Wichtig: Achten Sie darauf, dass alle Aufnahme- Das UP X4MB-FRT ist ein 2-Wege Koaxialsystem, punkte des Lautsprechers richtig eingerastet sind. welches in die Original-Tiefmitteltöner-Einbaupositi- on montiert wird. Nachdem Sie die Türverkleidung Montage des UP W8MB-S4 demontiert haben, entfernen Sie den Original- Zur Montage der Front-Subwoofer müssen Sie die Mitteltöner.
Rechtlicher Hinweis • MATCH by Audiotec Fischer bzw. die Audiotec Fischer GmbH sind in keiner Weise mit der Daimler AG oder einer ihrer Tochtergesellschaften oder Partnerunternehmen verbunden, oder handeln in deren Auftrag oder mit deren Autorisierung. • Alle geschützten Produktnamen und Markennamen sind das Eigentum ihrer jeweiligen Inhaber •...
MATCH speakers. Thanks to more than 30 years of experiences in research and development of audio products this Yours speaker system generation sets new standards. AUDIOTEC FISCHER Team General instructions General instructions for MATCH UPGRADE General instruction installing...
Seite 10
Dimensions UP S4MB-FRT: UP S1MB-FRT: UP X4MB-FRT: UP S4MB-SUR: *All dimensions are noted in mm...
Seite 11
UP S4MB-CTR: UP W8MB-S4: Left Right *All dimensions are noted in mm...
Seite 12
Installation Removal of the door panel / rear side panel / applications. center protective cover -3 dB: The level of the tweeter is reduced by 3 dB. In order to install the MATCH speakers in the origi- -6 dB: If you choose this switch setting, the level of nal mounting positions it is mandatory to remove the tweeter is reduced by 6 dB.
Seite 13
Installation of the UP X4MB-FRT Installation of the UP W8MB-S4 The UP X4MB-FRT is a 2-way coaxial system, For the installation of the front subwoofers you have which will be installed in the original midrange to remove the splashback cover in the front footwell. speaker position.
Legal note • MATCH by Audiotec Fischer or Audiotec Fischer GmbH are in no way affiliated with the Daimler AG or any of its subsidiaries or affiliated companies connected to, or is acting on its behalf or with its authorization.