English - Philips hr 7717 Bedienungsanleitung

English

Important
• Read the instructions in conjunction with
the illustrations before using the
appliance. Keep page 3 folded out when
reading.
• Do not leave the appliance operating
unattended.
• Do not allow children to operate the
appliance.
• Care must be taken when handling the
metal blade, the blender blade and the
slicing disc as these are very sharp.
• Remove the protective cap from the
metal blade before use.
• Let the rotating parts come to a complete
stop before opening the cover.
• Never put your fingers or e.g. a spatula
into the food chute or into the blender jar
while operating.
• Remove the mains plug from the wall
socket after use.
• If the mains cord of this appliance is
damaged, it must be replaced by the
special cord.
Apply to your Philips dealer or to the
Philips organization in your country.
• Prior to initial use, wash all the parts
which come into contact with food.
• Never immerse the motor unit in water or
any other liquid. Do not rinse either.
• When mixing or blending fluids, do not
fill above the maximum level indication
on the bowl or the blender jar.
• Do not exceed the maximum quantities
and processing times indicated in the
tables.
• Place the lid on the bowl in the right
manner. The built-in safety lock then
becomes unlocked and the appliance can
be switched on.
• Keep these instructions for future
reference.
General description
A
motor unit
B
Bowl
C
Cover of bowl
D
Ridge of cover (locks and unlocks the
built-in safety lock)
E
Safety lock
F
Metal blade £
G
Slicing disc § (double-sided)
A = thin slicing
[ = thick slicing
H
Grating disc • (double-sided)
A = medium grating
[ = coarse grating
I
Grating disc ¶ (double-sided)
A = extra fine grating
[ = fine grating
J
Whisk ß
K
Kneading accessory ^
L
Drive shaft
M
Food chute
N
Pusher with pushing guide
O
Switches
O = Off,
M = "Moment" (release = stop)
A = On (continuous operation)
P
Speed control
1 = minimum speed
2 = maximum speed
Q
Cord storage
R
Protective cap
S
Opening in the lid
T
Lid
Blender accessory ®
U
Blender jar
V
Rubber sealing ring
W
Blade unit
X
Screw-cap
Y
Storage box for discs
Graphic instructions
Left to the symbols of the various applications
you can see a picture of the accessory to be
used.
On the top line is indicated if it is best to switch on
pressing either M ("Moment") or A ("continuous").
Furthermore, the advisable speed is indicated
(i.e. 1 or 2 ). (Please also refer to the tables.)
4
(fig. 1)