Glow Fire Jupiter Bedienungsanleitung Seite 9

Button
Info When the heat function is used for the first time, there may be a slight odor. This is
normal and should not be repeated as long as the heating is not used for an extended
period of time.
Temperature limitation
This heater is equipped with a temperature limitation control. When the heater reaches an
unsafe temperature, the heater turns off automatically.
ACTION / FUNCTION
On: Activates the control panel functions
and
Remote control. Turns on the flame
effect.
OFF: Disables the function key functions
and
Remote control. Turns off the flame
effect.
TIMER - Button: Setting the timer -
Settings onTurn off fireplace at selected
time.The settings range from 0.5 hours
to 7.5 hours.
FLAME "-": Makes the flame effect
weaker. NOTE: The flame effect remains
onbutton is turned off. Flame effect
must be to turn on the heating.
FLAME "+": Makes the flame effect
brighter. NOTE: The flame effect
remains onbutton is turned off. Flame
effect must be to turn on the heating.
HEATER button: Turn the heater on and
off.NOTE: The heating only works when
the flame effect is switched on. When
the flame effect is off, the heating
element does not turn on. NOTE: To
avoid overheating, use the heater
Blowing cool air for 10 seconds before
heating turns on and then turns off.
Result
1. Press once. The indicator light lights
up. The device turns on. All functions
are enabled.2. Press again. The flame
effect is turned off. Power and all
functions switched off.
1. Press once. The indicator light lights
up. The timer is set to 0.5 hours.2. Press
again until the desired setting is set. The
indicator lights indicate the setting.
1. Press once. Flame effect weakens.2.
Press again until the desired setting is
set. Flame effect continues to getd-in
when the button is pressed.
1. Press once. Flame effect becomes
brighter.2. Press again until the desired
setting is set. Flame effect continues
when the button is pressed.
1. Press once. Display lights up. Fan
blows cool air for 10 seconds. Low
heating turns on and blows warm air.2.
Press again. Display lights up. High
heating turns on and blows hot air.3.
Press again. Switch off the heaters. The
fan blows cool air and then turns off.
9