Assembling The Front Speaker (Ht-Es4200 Only) - Samsung HT-E4200 Bedienungsanleitung

Assembling the Front Speaker (HT-ES4200 Only)

You can install the product in one of the following two ways:
Choose a desired one according to the installation area and your decoration plan.
Installing on the Partition
The front speakers can be combined by a partition.
1. Connect the left/right speakers to the
2. Insert screws into the hole on the rear of each
3. This is the appearance after the speaker is
Installing on the Table Stand
1. Connect the Speaker to the Stand Base.
2. Insert a screw into the hole on the rear of the
3. This is the appearance after the speaker is
HT-E4200_XU_0223.indd 17 HT-E4200_XU_0223.indd 17
Downloaded from www.Manualslib.com
Partition.
speakers, and then use screwdriver to tighten
screws clockwise.
installed.
speaker, and then use screwdriver to tighten
a screw clockwise.
installed. Follow this steps to install other
speaker.
manuals search engine
1
Partition
2
3
1 2
Speaker
Stand
Base
3
17
|
English
2012-02-24 오전 2:14:09 2012-02-24 오전 2:14:09