ASROCK 990FX Extreme9 Handbuch Seite 21

Downloaded from www.Manualslib.com
Step3. Align and insert the ASRock SLI_Bridge_2S Card to the goldfi ngers on
each graphics card. Make sure the ASRock SLI_Bridge_2S Card is fi rmly
in place.
ASRock SLI_Bridge_2S Card
Step4. Connect a VGA cable or a DVI cable to the monitor connector or the DVI
connector of the graphics card that is inserted to PCIE1 slot.
2.5.1.2 Installing Three SLI
Step 1. Install the identical 3-Way SLI
certifi ed because different types of graphics cards will not work together
properly. (Even the GPU chips version shall be the same.) Each graph-
ics card should have two goldfi ngers for ASRock 3-Way SLI-2S1S Bridge
Card connector. Insert one graphics card into PCIE1 slot, another graphics
card to PCIE4 slot, and the other graphics card to PCIE5 slot. Make sure
that the cards are properly seated on the slots.
Two Goldfi ngers
Step2. Connect the auxiliary power source to the PCI Express graphics card.
Please make sure that both power connectors on the PCI Express graph-
ics card are connected. Repeat this step on the three graphics cards.
ASRock 990FX Extreme9 Motherboard
manuals search engine
TM
-Ready Graphics Cards
TM
-ready graphics cards that are NVIDIA
®
21