Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Turning on
1. Ensure that the machine is plugged into a dedicated wall outlet.
(1) Do not handle the Power Plug with wet hands, or you may receive an electrical shock.
(2) Make sure to earth the machine for safety.
(3) Do not plug the printer into a multi-wiring connector in which other devices are plugged.
It may overheat the outlet and may result in a fire.
(4) The OUTLET must satisfy the following conditions.
2. Press " | " side the Power Switch on the right side of the printer to turn on the Machine.
3. The User Interface (UI) starts operating, and displays the following Copy Mode Screen in one
minute.
The Ready Indicator on Copy Mode Screen will flash during warming up.
Downloaded from
www.Manualslib.com
WARNING
120 V Specification Model: 120V plus/minus 10%, 50/60Hz and 15A
230 V Specification Model: 220-240V plus 6% or minus 10%, 50/60Hz and 10A
Power Switch
Ready Indicator
The UI screen may vary depending on your system configuration.
(Shown with available options)
manuals search engine
1
English
Press " | " side.
Werbung
