Steam Ironing; Vertical Steam; Automatic Shutdown (Auto-Off) - Beko SGA6126R Bedienungsanleitung

2 Operation
• If you press the steam trigger (11)
when the water tank is empty,
four icon lights, which are cor-
responding to the modes having
steam function, will flash on and
off as shown in the picture.
C
• When user presses function but-
ton after installing the tank with
water, the light will return to pre-
vious mode.
• Your appliance is suitable for using
with tap water. If your tap water is
excessively hard, we recommend
you to use a mixture of tap water
and potable water.

2.7 Steam ironing

• Operation of the pump may make
some noise during the water
drawing process; this is normal.
• The appliance starts in Smart-
ECO mode in the initial use. This
C
level offers safe temperature and
steam amount for all the fabrics
that can be ironed.
• When the icon light of the selected
setting flashes consistently on the
display, your appliance is ready to
iron.
14 / EN
WARNING
• Your selection should be suited for
A
the fabric to be ironed.
• If the icon light on the display
blinks, this means that the sole-
plate temperature setting is not at
the desired level.
• You can do steam ironing by using
the steam trigger (11) at all tem-
C
perature levels except for "•".
• Your iron will raise steam from its
soleplate (7) as long as you hold
the steam trigger pressed.

2.8 Vertical steam

You can iron your curtains and
C
hanged garments thanks to the
vertical steam feature. Keep the
appliance 15-30 cm away from the
garment and curtains.
WARNING: Never direct the steam
to people or pets.
2.9 Automatic Shutdown
(Auto-Off)
• If you do not move the appliance
or press any of its buttons for 10
minutes, it will be shut down au-
tomatically.
C
• If you move the appliance horizon-
tally or press any of its buttons, it
will start to operate.
• It may take 60 seconds for the
soleplate (7) to reach the previous
temperature level.
Steam Station / User Manual