Important Safety Instructions - Auerswald COMfortel H-200 Bedienungsanleitung

COMfortel H-200 Wired Headset
®
User Guide
Connecting and using your headset
Does your desk phone have a dedicated headset
connection port?
If it does, simply connect your headset's cable to your chosen
bottom lead (BL-04S+P supplied), then connect the bottom lead
to the dedicated port on your desk phone.
If you find that when the headset is connected to the phone it
is not working as expected then it is very likely you are using an
incompatible bottom lead.
There are various bottom leads available, these are all designed
to connect your headset to specific brands of desk phone,
ensuring whatever your setup, your headset will be compatible.
Please contact your dealer to attain the correct bottom lead for
your desk phone.
What to do if your desk phone does not support a dedicated
headset connection port:
Your desk phone requires an external headset amplifier. If you
already have a headset amplifier, read through the units setup
guide and connect your headset accordingly.
In the event that you do not have a headset amplifier, please
contact the supplier of this headset. They will be able to provide
the correct amplifier for your headset and desk phone.
Adjustable Headband
COMfortel H-200
®
Monaural Headset
Ear Cushion
Wind Shield
Microphone
Auerswald GmbH & Co. KG, Vor den Grashöfen 1, 38162 Cremlingen, GERMANY
Made in China

Important Safety Instructions

This headset is very easy to use and setup. For optimal use, we still
recommend that you read this user guide carefully before using
the headset for the first time.
Box Contents
1 x headset with clothing clip, wind shield and leatherette ear
cushion. 1 x spare foam ear cushion and 1 x BL-04S+P bottom
lead with RJ45 connection.
Unpacking
Remove your headset from its packaging and ensure you have the
correct specified accessories. Retain the headset box for storage
of your unit, and also in the event that it needs to be returned for
servicing or repair.
Safety
For your own safety, this product should only be used with CE
ACA and RoHS approved equipment. Using this headset with non
approved equipment can void this products warranty.
Maintenance
To gain optimal performance, hygiene and life-span from your
headset, replace all consumable items; - ear cushions, microphone
foam wind shield (if applicable) every 6 months. shop.auerswald.de
Environmental Notice
This headset has been made to CE, RoHS and WEEE standards.
In the interest of recycling raw materials, please do not dispose
of this headset in the household waste at the end of its useful
life. Disposal can take place at approved recycling or disposing
locations in accordance with local regulations.
Adjusting the Headband
Place the headset receiver to your ear and set the T-bar above
your other ear. Adjust the headband until it is comfortable, ideally
ensuring there is virtually no pressure felt on the ear.
300°
Using the Quick Disconnect Lead (QD)
Your headset is equipped with a Quick Disconnect Lead (QD)
allowing you to move away from your desk (disconnecting the
2 connectors) without losing the call.
To connect the QD on your headset to the QD on the bottom
lead, simply align the two QD's and push together. To disconnect
the QD's, simply pull the two QD's apart.
T-bar
Clothing Clip
Warning
Ensure that all electrical connections (including extension leads
and interconnections between pieces of equipment) are properly
made and in accordance with the relevant manufacturers
instructions.
• Do not continue to operate the equipment if you are in any
doubt about it working normally, or if it is damaged in any way.
Disconnect from your telephone equipment and consult your
dealer.
• Do not allow electrical equipment to be exposed to rain or
moisture.
• Never push anything into holes, slots or any other opening on
your headset as this could result in fatal electrical shock.
• Do not open the headset housing as doing so will void the
warranty.
• Never guess or take chances with electrical equipment.
• Do not use this equipment to report a gas leak while you are in
the vacinity of a gas leak.
• Telephone headsets are capable of producing high levels of
sound. Prolonged exposure to high sound levels can cause
damage to hearing.
• Never allow small children to play with the headset - small parts
may be a choking hazard.
Adjusting the Microphone Boom
To avoid low or distorted sound, and to
provide clear and crisp telephone calls,
the microphone should be positioned
within 30-40 mm of your mouth.
The microphone boom will move in
The headset can be worn on
a variety of directions to ensure the
either side. To change the
best fit.
microphone side, simply rotate
the microphone boom 300
degrees to the other side.
Adjusting the Clothing Clip
Your new headset is supplied with a clothing clip to allow
comfortable fitting of your headset without the cable getting
caught or inadvertently pulled.
The clothing clip should be fastened at a comfortable level,
ensuring there is sufficient slack on the cable allowing free
movement of your head without disturbing the headset position.
In the interests of hygiene it is advisable to replace the ear
cushions and wind shield of your headset every 6 months.
shop.auerswald.de
Quick Disconnect Lead (QD)
30 mm
BL-04S+P
Bottom Lead
www.auerswald.de