General Hints - VINCENT powerLine SP-331MK Bedienungsanleitung

This main amplifier is equipped with a stereo audio input ("INPUT") on which the unit awaits the preampli-
fied signal of two audio channels. This is the audio information that the SP-331MK provides for one or two
pairs of loudspeakers.

General hints:

No source with a standard line level signal ("LINE OUT") must be connected to this input. It is only
intended for preamplified signals (e.g. "PRE OUT").
This audio input must be connected to the output connectors ("OUTPUT") of a preamplifier. If the SP-
331MK is used in a stereo system, connect the input connectors of the SP-331MK with the preamplifier
output sockets that are usually labelled "PRE OUT R" and "PRE OUT L".
If the SP-331MK is used in a multi-channel system, then the connection sockets of the desired channels in
the connection field of the decoder preamplifier usually marked with "AUDIO OUTPUT" must be connec-
ted to the stereo input of this main amplifier.
SP-331MK
SP-331MK
Vincent
24
CONNECTING THE PREAMPLIFIER
RCA connection
RCA connection
stereo preamplifier
AV preamplifier