Black Decker HC400 Handbuch

Dustbuster
Electrical connection (UK user)
Before using your appliance, ensure the voltage on the charger
corresponds with your mains supply. Never use a light socket!
Do not replace the charger with a 13 amp plug or any other type
of charger. If in doubt, seek advice from your nearest electricity
board or Black & Decker service centre.
Safety points
•
The charger is for indoor use only.
•
Keep motor draught away from eyes and face during use.
•
Keep children and pets at a safe distance away when in use.
•
Never use to pick up flammable or combustible liquids.
Product features (Fig. A)
A
1. On/off slide switch
2. Release button
3. Dust bowl
4. Wall mountable charging base
4a. Deluxe base with accessories (if supplied)
5. Charger
Please note: The illustrations show a loop handle unit, however,
some units have a stick handle.
Installation instructions (Fig. B)
B
Fix the charging base vertically to the wall using the
screws and plugs supplied, as illustrated,and within reach
of a power socket. Plug in and place the product into
position. The charging base can also be fixed, or simply
placed, in a convenient horizontal position.
Note: Avoid damaging the cable while fixing the holder to
the wall or when removing or replacing the product from
the holder.
Recharging
From new, the rechargeable cells of the product need a minimum
charge time of 16 hours to ensure full power. We suggest you
fully discharge the product when it is used for the first time as this
will help the cells recharge faster. The switch must be in the off
position; the product will not charge if it is in any other
position. Whilst charging, the charger will get warm; this is
perfectly normal and safe, and your product can remain on
charge indefinitely without damage or danger. It is not possible to
"overcharge" the battery cells with the charger provided.
How to use (Figs. C & D)
C
To start, slide the on/off switch forward (i.e. 0 = off, I = on).
To stop, slide the switch back.
2
ENGLISH
®