Radio Operation; Specifications - Konig Electronic HAV-CR74 Anleitung

RADIO OPERATION

- Press the on/off button (9) to turn radio on
- Select AM or FM band using the wave band switch (15)
- Select the Station using the tuning control (16)
- Turn the volume control (14) to adjust volume as required
- Press the on/off button (9) to turn radio off.
Note :
- The AM band use an internal directional aerial. Rotate the radio for best reception.
- Ensure that the FM cord antenna (20) is completely unrolled and extended for best FM
reception.
RESET
- The reset button (17) is located on the back of unit. Use a ballpoint pen to press it whenever
you change the batteries, or unit is not performing as expected. This will return all settings to
default value, and you will lose any stored data (alarm and clock settings).

SPECIFICATIONS

Frequency range :
Output power :
Speaker impedance :
Battery backup :
Power source :
NOTE : Do not connect FM antenna to outside antenna.
AM 530 – 1600 kHz
FM 88 – 108 MHz
350mW
8 ohm
9V battery (for clock) – Not included
AC 230V ~ 50 Hz, 5 watts
9