Herunterladen Inhalt Inhalt Diese Seite drucken

Maintenance - Afk BSC-2300W.4 Gebrauchsanleitung

Bodenstaubsauger
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1
Hold the plug and pull out the cord, then insert the plug into the
power socket.
Make sure that the power supply corresponds to the required power
mentioned on the rating label. Press the on/off switch pedal to turn
on the power. Adjust it to the required level depending on the
cleaning function.
4. Turn off the appliance:
After using, press the on/off switch pedal, the appliance is turned off.
Pull the plug out of the power socket, press the cord pedal, the power
cord will be drawn in.
5. To move the appliance from room to room, unplug and carry it by
using the handle. Never pull the appliance by its cord when moving.
III) MAINTENANCE:
1. When the dust full indicator turns to red, it is time to clean the dust
bag or replace with a new bag. To do that, please follow the
instructions:
a) open the front cover by pressing the lock clip
b) Lift up the dust tank handle to take out the dust tank.
c) Situated the dust tank just above the dust bin.
d) Press the dust release button at bottom of dust tank, the dust tank
lower base will open automatically and dust will come out from the
dust tank.
e) Insert the dust tank back into the machine at the proper situation.
NOTE:
The motor protection filter, HEPA filter and the exhausted filter should be
removed and rinsed twice a year or whenever it is visibly clogged. If the filter is
damaged, a new filter should be replaced.
Power Cord Marking
NOTE:
Do not exceed the red mark when pulling out the cord.
The yellow mark shows the ideal cable length.
WARNING: the plug must be removed from the power socket before any
maintenance or replacement.
6

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis