ATTACHING THE STRAP AND LENS CAP
1
Pass the lens cap string through
the hole in the lens cap.
2
Fasten the strap to the strap
eyelet as shown in the diagram.
3
Adjust the strap to the desired
length. Pull the strap through the
stopper (A) and make sure it is
En
fastened securely
4
Attach the strap to the other eyelet in
the same way.
LOADING THE BATTERIES
1
Make sure the camera is turned off.
• The monitor is off.
• The viewfinder is off.
• The lens is not extended.
2
Slide the battery
compartment lock from
= to ).
10 En
.
Battery
compartment
cover
Battery
compartment
lock
strap eyelet
A