MSI EC14H Bedienungsanleitung Seite 10

Ethernet to Powerline HomePlug Adapter
Testing the Connection
You can use Windows standard Ping utility to verify if your powerline
connection is set up properly.
1. Click Start at the taskbar and select Run; then, type
2. Type
3. It will display the IP address of your PC to which MSI EC14H
4. Enter the command
1 0
Downloaded from www.Manualslib.com
in the Open box and click OK.
ipconfig in the
prompted DOS command
window and and press
[Enter].
is attached, along with Subnet Mask and Gateway address.
where IPADDRESS
manuals search engine
"ping IPADDRESS" and press [Enter],
is the one found in preceding step.
If the Ping succeeds, it shows the set
up is correctly done. Then, repeat the
same process with other powerline
devices on the network. If this Ping
fails, it means there is a problem with
the set-up.
command