Requirements - AKE BT-HC2 Handbuch

headset profil (HSP) to be transfered into two directions. The stereo-mode
supports the A2DP (2-channel audio profil) and thus allows a high quality
signal to be transfered to the helmet. You can easily switch between both
modes by pressing the operating button. Used on a AKE PowerCom
system the optimal profile is automatically activated when driving solo.
Please note that we can not guarantee the
functionality, when used in combination with
Bluetooth helmet sets from other manufacturers
AKE also provides you with preconfigured complete sets constisting
of one Bluetooth Helmet Connector and one Stealth Bluetooth Helmet
Set 201 for hidden installation in your helmet, e.g.:
Bluetooth-Extension-Set BM for AKE-PowerCom
Bluetooth-Extension-Set BM for 5-pinl-Din (Baehr-Intercom)
Bluetooth-Extension-Set BM for Harley Boom Box Build-In version
Bluetooth-Extension-Set BM for Honda Goldwing

Requirements

1. A motorbike intercom system from
Harley Davidson (Boom Box), Honda Goldwing, etc.
2. A Bluetooth helmet or an adequate Bluetooth system with charged
battery, password if required: 0000, 1111 or 1234, supported profiles:
HSP/HFP 1.5 for Duplex and A2DP for Stereo .
3. All used Bluetooth components must be within the reach of the Bluetooth
connection, the Bluetooth helmets might well be on different motorbikes.
Illustration
1 Bluetooth Helmet
2 Stealth Bluetooth Helmet Set
3 Bluetooth Helmet Connector
4 Adjustment of mic. signal (optional)
5 Multifunction button
6 Display for operation mode
AKE
6
3
5
4
5
Art-no.: 31441
Art-no.: 31454
Art-no.: 31455
Art-no.: 31449
(PowerCom-series), Baehr,
6
1
2
11