Garmin ATEMOS 100 Schnellstartanleitung Seite 6

This method is helpful when you are
adding a new accessory collar to the
system prior to leaving for the hunt
(page 6).
Entering the track and train codes:
Allows you to add a dog collar device
that you do not own and that is not in
the area. The dog's owner must
determine if you can only track the dog
or can track and train the dog. This
method requires the dog's owner to
find and communicate the codes to the
person adding the dog collar device.
This method is helpful when you would
like to add a dog collar device during a
hunt, but you are not near the dog. For
example, you are adding another
member of your hunting party's dog
collar device to your handheld device,
but you do not own the dog collar
device (page 6).
NOTE: This feature varies based on
dog collar device type and feature
availability in your area. You may see
track codes only or track and train
codes.
Sharing wirelessly using ANT+
wireless technology: Allows you to
Quick Start Manual
add a dog collar device that you do not
own and that is not in the area. The
dog's owner must determine if you can
only track the dog or can track and
train the dog. This method does not
require the dog's owner to find and
communicate the codes to the person
adding the dog collar device. This
method also adds dog information,
such as the dog's name,
communication settings, and initial
position, from the sending handheld
device to your device. The two
handheld devices must be within range
3 m (10 ft.) to share data wirelessly.
This method is helpful when you want
to add a dog collar device during a
hunt, but you are not near the dog. For
example, the dogs have already been
let loose, and you are near the dog
owner, who can share the dog
wirelessly.
VHF Radio Information
This product may be used only on specific
radio frequencies, which vary depending
on the country of use. The handheld
device and the dog device allow the user
®
to install a different antenna. Changing the
antenna can result in improved radio
5