Garmin ATEMOS 100 Schnellstartanleitung Seite 4

2
Locate the metal contacts on the end
of the lithium-ion battery.
3
Insert the battery into the
compartment, contacts first.
4
Press the battery into place.
5
Replace the battery cover, and turn the
D-ring clockwise.
Charging the Handheld Device
NOTICE
To prevent corrosion, thoroughly dry the
USB port, the weather cap, and the
surrounding area before charging or
connecting to a computer.
NOTE: The device does not charge when
it is outside the approved temperature
range (page 9).
You should fully charge the battery before
you use the device for the first time.
Quick Start Manual
Charging a fully depleted battery takes
about 2 hours.
1
Lift the weather cap
2
Plug the small end of the power cable
into the USB port
3
Plug the other end of the power cable
into an appropriate power source.
The LCD display on the handheld device
shows the current battery charge level.
Charging is complete when the battery
charge level icon stops flashing.
Turning On the Devices
• On the handheld device, hold the
power key until the LCD display turns
on.
.
on the device.
3