Operation; A) Doorbell; B) Reset Device / Enter Pairing Mode; C) Status Indicator Description - Sygonix SY-DB-400 Bedienungsanleitung

12. Operation

a) Doorbell

Press the doorbell button (4) to activate the doorbell. You will re-
ceive an alert on your mobile device if paired with the application.
Refer to your mobile device operating instructions for
information about notification settings.

b) Reset device / enter pairing mode

Reset the camera if it is not working correctly or you wish to enter
pairing mode.
Insert the included pin into the RESET button hole (5).
•
• Press until you feel a "click" and hold for 5 seconds until you
hear an audio prompt.
The status indicator light (3) will blink red to indicate reset is
•
successful and the camera is now open for pairing.

c) Status indicator description

Light (3)
Red
Red
Blue
44
Status
Solid on
Blinking
Solid on
Description
Camera or network is abnormal.
Waiting for Wi-Fi connection.
Camera operating correctly.