Troubleshooting - AsViva V12 Bedienungshandbuch

TROUBLESHOOTING

Problems
The product can not be
started.
Sound is heard during
workout
The remote control
no longer works
Sudden stop of the
Vibrating plate
There is no connection
Causes
1. The plug is not in place.
2. The power switch is off.
3. The fuse is burn.
Normal sound generated by the
motor or from the abrasion between
mechanical units.
1. The batteries are empty.
2. The remote control is too far from
the vibrating plate.
The specified training time is over.
The vibrating plate receives
too many signals.
Solutions
1. Insert the plug
2. Turn switch on the indicator.
3. Replace with a new fuse of the
same mode.
No additional treatment is required.
1. Replace the batteries.
2. The maximum possible distance
is 2.5m. Please do not exceed this.
The device starts again after 10
minutes.
Turn off the device and try again.
37