Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Installation Instructions
Installation Instructions
Installation in a 19" Industrial Cabinet
Installation of any additional cards or supplementary drives
should be carried out before installing the device into a 19"
cabinet.
Refer to the instructions under "Accessing Internal Components".
Before mounting the device in a cabinet, the peripheral devices
should be connected to the appropriate system interfaces.
Refer to the instructions under "Ports on the left side".
Important instructions!
The OptiMation may to be installed and operated only by trained
and qualified personnel.
Since the device may weigh up to 19.5 kg, it is advisable to
obtain assistance during the installation procedure.
Make sure there is sufficient air circulation around the device
when installing the OptiMation.
The openings for air intake and exhaust on the device must not
be obstructed.
When installing in a 19" cabinet, leave at least 5 cm of space free
around the unit to prevent the device from possibly overheating.
36
OptiMation – User Manual
Werbung
Kapitel
Inhaltsverzeichnis
