Herunterladen Inhalt Inhalt Diese Seite drucken

VLX 3814SR Bedienungsanleitung Seite 42

Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 44
The electrolyte in the battery is
turbid
ALARMS ON THE DISPLAY:
ERROR CODE DISPLAYED
BRUSH TEMPERATURE PAUSE
BATTERY RESERVE
BATTERY FLAT
BATTERY EXHAUSTED
BRUSHES EXHAUSTED
PARKING BRAKE
DIRTY WATER TANK LEVEL
WATER RESERVE
NO WATER
CHEM RESERVE
NO CHEM
ENGLISH
26
• The battery has reached the
end of the charging/discharging
cycles
declared
manufacturer
• the battery has been recharged
with too high a current
• the battery has been charged
beyond the limit suggested by
the Manufacturer
CAUSE
The machine has worked for too long
at a high pressure
The work programme being used is
too heavy for the type of surface
Electronics damaged
The battery voltage is <31.5V
The battery voltage is <29V
The battery voltage is <27V
The brushes are worn
The floor is very smooth and the brush
motor does not reach the required
absorption
The parking brake is on
The brake pedal microswitch is not
mounted correctly
The brake pedal microswitch is not
functioning correctly
The level sensor is activated by the
water level
The level sensor is blocked in the
CLOSED position
The level sensor is activated by the
water level
The level sensor is blocked in the
CLOSED position
The level sensor is activated by the
water level
Detergent running out
No detergent
• replace the battery
by
the
• replace the battery
• replace the battery
SOLUTION
Wait 30 minutes for the temperature to
drop
Change from P3 to P2 or P1 (if P1 is
already being used, follow the setting
instructions to reduce the pressure)
Replace the power board
Charge the battery
Charge the battery
Check the level of acid in the battery
and charge
Replace the brushes
Change the work programme from P3
to P2 or P1
Release the parking brake
Adjust the position of the microswitch
Replace the microswitch
Empty the dirty water tank then reset
the machine
Check and if necessary replace the
sensor
Prepare to empty the dirty water tank.
Check and if necessary replace the
sensor
Fill the detergent tank, then reset the
machine
Check and if necessary replace the
sensor
Fill the detergent tank
Fill the detergent tank

Werbung

Inhaltsverzeichnis
loading

Diese Anleitung auch für:

6023srCt160Ct230

Inhaltsverzeichnis