Panasonic FZ-M1 Serie Bedienungsanleitung Seite 14

First-time Operation
1
2
3
A
B
14
1 Inserting the Battery Pack
Turn over the computer and insert the battery pack (A) until it touch to the secured posi-
tion (B).
l Make sure no foreign objects are under the computer.
CAUTION
l Make sure the latch is securely locked. Otherwise the battery pack may fall when you carry
the computer.
l Do not touch the terminals of the battery pack and the computer. Doing so can make the ter-
minals dirty or damaged, and may cause malfunction of the battery pack and the computer.
2 Connect your computer to a power outlet
A Open the cover.
B Connect your computer to a power outlet.
The battery charging starts automatically.
CAUTION
l Do not disconnect the AC adaptor until the first-time operation procedure is completed.
l When using the computer for the first time, do not connect any peripheral device (including
wired LAN cable) except the battery pack and AC adaptor.
l Handling the AC adaptor
Ÿ Problems such as sudden voltage drops may arise during periods of thunder and light-
ning. Since this could adversely affect your computer, an uninterruptible power source
(UPS) is highly recommended unless running from the battery pack alone.
l When the DC plug is not connected to the computer, disconnect the AC cord from your elec-
trical outlet. Power is consumed simply by having the AC adaptor plugged into an electrical
outlet.
3 Turn on the computer
Press the power switch
CAUTION
l Do not press the power switch repeatedly.
l The computer will be forcibly turned off if you press and hold the power switch for four sec-
onds or longer.
l Any changes from the default setting of the Setup Utility must not be made until the First-time
Operation is completed.
l Once you turn off the computer, wait for ten seconds or more before you turn on the com-
puter again.
l When the CPU temperature is high, the computer may not start up to prevent overheating
of the CPU. Wait until the computer cools down, and then turn the power on again. If the
computer does not power on even after cooling down, contact Panasonic Technical Support
(
Operating Instructions - Reference Manual).
(A) until the power indicator (B) lights.