Glow Fire Kästner Aufbauanleitung Seite 11

• In the next step, the black back wall is inserted and then the board 7 is screwed on.
• Now you can insert board 8.
•
Mount the rear cover 9 with 10 short screws as shown.
•
The element 8 is available in two versions, each with a differently sized cutout. Choose the
right one for your water vapor cassette.
•
You can now carefully insert the water vapor cassette in element 8. Due to the structural
properties of the fireplace insert in relation to the screws inserted on the side, slight damage
to the edge of the element 8 cannot be ruled out. This has no influence on the optics and the
function. Lack of lacquer, which occurs when inserting the cassette, is thus excluded from
any liability.
•
Please note the further instructions regarding the operation of the steam cassette.
Aufbauanleitung Glow Fire Kästner
3.Step
Stand: 07/2019
V.1.1