Cleaning And Care - Westinghouse WKTTB809RD Anweisungen

Tips
• The defrost process adds extra time to the normal toasting process. It defrosts
the bread first before toasting.
• When toasting more than 1 slice of bread, make sure the slices are of a similar
size, thickness and freshness.
• Old bread will be less moist than fresh bread, and may make your toast crispier.
• Old, thin and sweet bread (e.g. tea cakes and fruit loaf) takes less time to toast,
so a lower browning level should be used.
USING THE BUN WARMER FOR WARMING ROLLS OR OTHER BAKED GOODS
1. Make sure the toaster is unplugged and completely cooled down before using
the bun warmer.
2. Hold the two bun warmer handles (10), then lift the bun warmer (9) up until it
clicks into place.
3. Connect the toaster to the power supply.
4. Turn the browning control knob (2) to adjust the browning level (level 1 to level
6) of the rolls or baked goods.
5. Place the rolls or baked goods on the bun warmer.
6. Push the loading handles (8) down. The CANCEL button indicator (3) under the
browning control knob (2) will light up while the rolls or baked goods will start to
heat up.
7. When the selected browning level is reached, the toaster will turn off
automatically.
8. Remove the rolls or baked goods from the bun warmer.
Note:
• You can press the CANCEL button (3) to stop toasting at any time.
• Make sure you toast the rolls or baked goods on both sides for even browning
results.

CLEANING AND CARE

• CAUTION: Always unplug the appliance from the wall socket and let it cool down
before cleaning.
• Wipe the outside of the appliance with a soft damp cloth.
• Do not let anything enter the toasting slots (1), as this may damage the
appliance.
• Do not immerse the appliance in water or other liquids or allow moisture to come
into contact with the parts.
• Never use solvents, chemical or abrasive cleaning agents, wire brushes, sharp
objects or scouring pads to clean the product.
• Unplug the toaster and let the appliance cool down completely. Remove bread
crumbs from the crumb tray (7) after use. Wipe it with a damp cloth, let them
dry, and then slide them back into the toaster. Regular cleaning of the crumb tray
(7) is required as accumulation of crumbs may pose a fire hazard.
• Unplug the toaster and let it cool down completely before detaching the bun
warmer (9) for cleaning. Wipe it with a damp cloth and let it dry before placing it
back on the toaster.
• Remove bread crumbs from the crumb tray (7) after use. Wipe the crumb tray
with a damp cloth. Let it dry and slide it back into the toaster. Regular cleaning
of the crumb tray (7) is required as accumulation of crumbs may pose a fire
hazard.
EN
5