Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Aufbau- und Bedienungsanleitung / User Manual
Step 1 – First connect the two tubes (1) and (2).
Make sure the safety lock snaps (CLICK).
Step 2 - Slip one of the tubes mounted in step 1 through the tabs on the top edge of the goal net.
Step 3 – Thread the two goal posts (3) through the side net straps of the goal and the connect these goals posts
with the upper cross brace from step 1
Make sure the safety lock snaps (CLICK).
Step 4 – Slide the lower side crossbars / frames (4) and (5) through the lower side tabs of the goal net.
Step 5 – Then connect the struts (4) and (5) to the lower ends of the goal posts. Make sure the safety lock snaps
(CLICK).
Step 6 – Slide the rear lower crossbar from step 1 through the rear tabs of the goal net.
Step 7 – Connect struts (4) and (5) to the rear crossbar from step 1.
Make sure the safety lock snaps (CLICK).
Step 8 – Connect the two rods (6) and (7) to the rear side posts.
Make sure the safety lock snaps (CLICK).
Step 9 – Bolt the rear side posts to the crossbars from step 1 using the screws (9) provided. Ensure that the goal
net extends beyond the rear side posts.
Step 10 – Stability of the goal
Attach the two ground hooks (8) with the side bar rods (4) and (5).
Make sure the safety lock snaps (CLICK).
Fix the goal frame by means of the hooks (8) on the ground. Ascertain that the ground is suitable for the
application of hooks (e.g. no water pipes for sprinkler devices!).).
On too hard grounds the goal must be saved by appropriate measures in another way against overturning in order
to prevent risk of injuries (e.g. with slabs or sandbags). Never play with an unsecured goal or never leave the goal
unsecured respectively
Step 11 (optional) – Attach the goal wall (11) to the front of the goal as shown in the previous illustration.
Have fun with your new goal BANDITO BLACKLINE!
Aufbau- und Bedienungsanleitung/User Manual // 4815.01
Werbung
