General; Introduction; Enquiries And Orders; Technical Data - Zehnder FSP 330 Betriebsanleitung

1. General:

1.1 Introduction

This operating manual is valid for the submersible puddle pump type FSP 330.
If the instructions of the operation manual – especially the safety instructions - are not ob-
served, or in case of unauthorized modifications of the device or the installation of non-original
spare parts, the guarantee expires automatically. The manufacturer assumes no liability for
damages resulting from such behaviour!
Such as any other electrical device, this product may fail due to absence of mains voltage or a
technical failure. If damage could occur, an emergency power supply, a second plant and/or an
off-grid alarm device should be provided according to the application. We as manufacturer are
at your disposal for consultation also after the purchase. In case of failures or damages, please
contact your retailer.
Manufacturer: ZEHNDER Pumpen GmbH
Zwönitzer Straße 19
08344 Grünhain-Beierfeld
Date of manufature: The date of manufacture of the pump is engraved on the top of the housing.
Manufactured size:
State of the operation manual: January 2020

1.2 Enquiries and orders

In case of enquiries or orders, address yourself to your specialist retailer.

1.3 Technical data:

Pressure pipe connector
max. particle size
Input power P1
Power reception
Supply cable
Floating switch
max. discharge flow
max. discharge height
max. submersion depth
Materials:
Pump housing:
Outer housing:
Motor housing:
Running wheel:
Screws:
Motor shaft:
The puddle pump type FSP 330 is applicable up to a liquid temperature of 40 °C.
puddle pump type FSP 330
1"
1 mm
300W
1.3 A
10 m
no
5500 l/h
7.0 m
5.0 m
Polypropylene (PP)
Polypropylene (PP)
Stainless steel
PA 6
Stainless steel
Stainless steel
13