auna multimedia Digidab Bedienungsanleitung Seite 17

The clock in this radio is equipped to receive a DAB radio frequency time signal. After the unit has been tur-
ned on, it will automatically tune into a DAB radio station and update the clock. It may be necessary to wait
for 1-2 minutes to allow the unit to receive the time signal. If the area will only receive an FM signal it will be
necessary to manually set the clock.
• Press MENU and rotate the SEARCH control to until the display shows "System", then press SELECT to
confirm.
• Rotate the SEARCH control to until the display shows "Time" and then press SELECT. Scroll through to
"<Set Time /Date>" and press the SELECT button again confirm.
• Change values with SEARCH and confirm each change pressing SELECT.
When the device is turned on initially, it switches to DAB mode automatically and performs a complete
stations scan. A progress bar will be displayed as will the number of found stations.
The device automatically saves all found stations to presets in alphanumerical order. Rotate SEARCH to
scroll through the stations list and press SELECT to tune in the currently displayed station. On finishing the
station scan, the first (alphabetically) station will be tuned in automatically, though.
If no stations were found, display shows "FULL SCAN". You can now switch to "MANUAL TUNE" with SEARCH
to manually tune in stations, or try again and click SELECT on "FULL SCAN"
To select manual tune, press MENU, rotate the SEARCH control to select "Manual tune" and press SELECT
to confirm. Rotate the SEARCH control to move through the DAB channels, the display will show "5A to 13F"
and their associated frequencies. When your desired frequency appears in the display, press the SELECT
button to listen, the name of the station group (ensemble/multiplex) will be displayed.
Setting Time / Date
Radio Operation (DAB)
17