Management; Storage; Transport; Warnings - ARVEN TURBO 250 1 Bedienungsanweisung

5 MANAGEMENT

5.1. STORAGE

All the pumps must be stored indoors. in a dry. vibration-free and dust-free environment, pos-
sibly at constant air humidity.
They are supplied in their original packaging and must be kept there until installation.

5.2. TRANSPORT

Avoid subjecting the products to needless jolts or collisions.
The electropumps must never be carried or lifted by their power cables.

6 WARNINGS

6.1. QUALIFIED PERSONNEL

The term

6.2. SAFETY

-Never let the pump run dry.
The pumps must never be carried, lifted or operated hanging from their power cables.
carried out, could cause damage and accidents.

6.3. MOTOR SHAFT ROTATION CHECK

To do this:
- Completely disconnect the pump from the mains.
- Place the pump in a horizontal position.
- Remove the grill and the plastic conveyor, and operating on the self-loccking-nut
- Reassemble the grill and the conveyor and install the electropump as indicated in
chapter 7.
right for ROXY, left for WORKER), rotate the shaft motor
-
17