Kemar KSB-100G Gebrauchsanleitung Seite 42

DESCRIPTION AND FUNCTION OF THE PARTS
ENGINE BASE
The motor base has an anodized
Surface. Has a secure stand
the motor base via suction feet. The motor base has no on / off
switch.
The motor base only works if a blender jug with a blade
attachment is inserted and pushed down.
The motor base has a manual reset. Should the mixer ever
overheat, it will switch off automatically. Unplug the power cord
and wait at least 45 minutes. The mixer is then ready for use
again.
Please note that to activate one of the two containers with a
blade attachment must always be on the motor base. Without
the container in place, the motor base is in standby mode.
42
EN
KSB-100