General Description; First Use - Philips HD6596 Bedienungsanleitung

General description

1 1-cup pod holder
2 2-cup pod holder
3 Distribution disk
4 Collector ring
5 Drip tray
6 CALC light
7 Jug button
8 2-cup button
9 1-cup button
10 Water reservoir lid
11 Water reservoir
12 Filter holder lid
13 Filter holder
14 Insulated jug lid
15 Insulated jug
16 Measuring spoon

First use

The machine starts an automatic flushing cycle when you switch it on for the first time, no matter
which button you press.
1 Put the plug in an earthed wall socket.
2 Remove the water reservoir from the machine and remove the lid from the water reservoir (Fig. 4).
3 Clean the water reservoir thoroughly in hot water, if necessary with some washing-up liquid.
4 Fill the water reservoir with clean cold water up to the MAX indication (Fig. 5).
5 Put the lid back onto the water reservoir and put the water reservoir back onto the machine (Fig. 6).
6 Place the 1-cup pod holder in the coffee machine. Close the lid and make sure it is properly locked
(Fig. 7).
7 Remove the drip tray from the platform and put a bowl (with a capacity of at least 1.5 liters) or the
jug under the coffee outflow (Fig. 8).
8 Press one of the buttons on the control panel. The jug button, 2-cup button and 1-cup button flash
in sequence (Fig. 9).
9 The flushing cycle starts. During the flushing cycle the system fills itself with water from the water
reservoir. The machine produces more noise than during a regular brewing cycle.
10 The machine switches off when the water tank is empty (Fig. 10).
11 After the first flushing cycle, clean the collector ring and the pod holders with hot water and some
washing-up liquid or in the dishwasher.
Brewing a jug of drip-filter coffee
1 Open the lid of the machine (Fig. 11).
2 Remove the pod holder, if present (Fig. 12).
3 Remove the drip tray, if present.
4 Fill the water reservoir with clean cold water up to the level required for the number of cups of
coffee you wish to brew and put the water reservoir back onto the machine (Fig. 13).
5 Rinse the insulated jug with hot tap water to preheat it .
Tip: To obtain the tastiest and hottest coffee, brew at least half a jug of coffee.
6 Place the filter holder on top of the insulated jug (Fig. 14).
English
9