Navitel T505 PRO Benutzerhandbuch Seite 60

# Element
Tapping on the button shows
the menu for operations with the
point marked on the map (making
17 "Cursor" button
it a destination point by pressing
"Go!" button or proceeding to the
properties screen).
Saves the point marked on the map
18 "Save WP" button
as a waypoint.
Switching between the plain 2D
19 2D/3D
and the panoramic 3D map views.
Short tap on the map marks the
point for further operations with it:
20 Point on the map saving as a waypoint, adding to the
route or viewing the object's data,
and others.
Provides access to the program
21 Updates
and map update menu screen.
Button for track recording: red
22 Track recording dot – recording is on, grey dot –
recording is stopped.
The icon displays general traffic
intensity
23 Navitel.Traffic Tapping on the button shows the
menu for controlling the "Navitel.
Traffic" service.
Function
on ten-point scale.
# Element
Tapping on the button gives a
command to the program to
24 "Go!" calculate a route from the current
position or the set initial point to
the selected point.
Tapping on the button determines
the selected point as a starting
25 "Set start"
point of the route (GPS-receiver
must be switched off ).
The button is active only when
there is an existing route. Pressing
26 "Set finish" the button continues the route up
to the selected point making it the
destination point of the route.
NAVITEL T505 PRO | 59
Function
EE