Navitel T505 PRO Benutzerhandbuch Seite 143

142 | LIETOTĀJA ROKASGRĀMATA
# Element
17 "Cursor" button
18 "Save WP" button
19 2D/3D
LV
20 Point on the map
21 Updates
22 Track recording
23 Navitel.Traffic
Function
Tapping on the button shows
the menu for operations with the
point marked on the map (making
it a destination point by pressing
"Go!" button or proceeding to the
properties screen).
Saves the point marked on the map
as a waypoint.
Switching between the plain 2D
and the panoramic 3D map views.
Short tap on the map marks the
point for further operations with it:
saving as a waypoint, adding to the
route or viewing the object's data,
and others.
Provides access to the program
and map update menu screen.
Button for track recording: red
dot – recording is on, grey dot –
recording is stopped.
The icon displays general traffic
intensity on ten-point
Tapping on the button shows the
menu for controlling the "Navitel.
Traffic" service.
# Element
24 "Go!"
25 "Set start"
scale.
26 "Set finish"
Function
Tapping on the button gives a
command to the program to
calculate a route from the current
position or the set initial point to
the selected point.
Tapping on the button determines
the selected point as a starting
point of the route (GPS-receiver
must be switched off ).
The button is active only when
there is an existing route. Pressing
the button continues the route up
to the selected point making it the
destination point of the route.