Herunterladen Inhalt Inhalt Diese Seite drucken

Resol VBus/BACnet Handbuch Seite 28

Schnittstellenadapter
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Device is not found by the DeviceDiscovery Tool
Problem
Solution
The device is not
Check the following points in order to find and eliminate
found by the Device-
the error.
DiscoveryTool.
Î Check if the power supply to the device is established.
Î Check if the network cable is properly connected at
both ends!
Î Check if the firewall software of the computer inhib-
its the connection to the device.
Î Switch off the firewall software and use the Device-
DiscoveryTool to find the device.
Î When the device has been found, the firewall soft-
ware has to be reconfigured.
Î Activate the firewall software!
Î Check if the current Java software is installed.
If no or an old Java version is installed, an error message
appears.
In order to eliminate the error, the current Java software
has to be installed from http://java.com.
Î Check if an IP address is assigned to the device.
An IP address has to be assigned to the device by a rout-
er or a directly connected PC. This process may take
several minutes.
Computers with a Windows operating system indicate
an IP assignment in progress by displaying a symbol on
the task bar. The symbol consists of two computers or-
bited by a yellow ball.
Î Check if an IP address is automatically assigned to
the computer upon a direct connection to the device.
28
Problem
Solution
The device is
In order to check the automatic IP address retrieval, pro-
not found by the
ceed as follows:
DeviceDiscoveryTool.
Î Click the Start symbol on the task bar.
Î In the Settings menu, select the Control panel.
Î Double-click Network connections.
Î Right-click the device connection.
Î Click Properties.
Î Mark TCP/IP Internet protocol.
Î Click the Properties button.
Î Mark the Obtain IP address automatically field.
Î Mark the Obtain DNS server address automat-
ically field.
Î Close all windows by clicking OK.
Î Check if the proxy server settings for the operating
system are correct.
The device is
In order to check if the proxy server settings for the
not found by the
operating system are correct, proceed as follows:
DeviceDiscoveryTool.
Î Click the Start symbol on the task bar.
Î In the Settings menu, select the Control panel.
Î Double-click the Internet Options symbol.
Î Click the Connections tab.
Î Click the LAN Settings button.
Î Tick the Use a proxy server for your LAN check-
box.
Î Click the Advanced... button.
Î Close all windows by clicking OK.
Î Check if the proxy server settings for the Internet
browser are correct.

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis