Vivanco CAR 2XAA Bedienungsanleitung Seite 4

power supply unit which facilitates electricity supply
through the mains.
In the case of totally discharged battery packs the
voltage established can deviate briefly from that
given on the battery pack's nameplate.
Caution: Charging of other reachargeable cells or
non rechargeable batteries is dangerous and
therefore forbidden.
Starting up
First of all, insert the connector plug of the mains
adapter or the car adapter into the input socket of
the charger and then supply power from the mains or
the car supply system. The red »Power« LED
indicates readiness to operate.
Charging
1. Use the sliding switch on the left side to
determine whether 2 or 4 battery packs are to
be charged simultaneously.
2. Insert 2 or 4 AA batteries with + at the top
(see marking in battery compartment). The
»Charge/Ready« control Iamp turns red,
indicating that charging has begun. Once the
battery packs have been fully charged the
charger switches automatically to trickle
charging and the »Charge/Ready« control
Vivanco GmbH, Ewige Weide 15, D-22926 Ahrensburg,
hotline@vivanco.de 4