Inhaltsverzeichnis
Werbung
Routing
13.7 OSPF
OSPF Admin Mode................................ enabled
Router ID...................................... 10.0.2.2
ASBR Mode...................................... enabled
RFC 1583 Compatibility......................... enabled
ABR Status..................................... disabled
Exit Overflow Interval......................... 0
External LSA Count............................. 0
External LSA Checksum.......................... 0
New LSAs Originated............................ 0
LSAs Received.................................. 0
External LSDB Limit............................ no limit
SFP delay time................................. 5
SFP hold time.................................. 10
Auto cost reference bandwidth...................100
Default Metric................................. not configured
Default Route Advertise........................ disabled
Always......................................... false
Metric......................................... 0
Metric Type.................................... external-type2
Maximum Path................................... 4
Trap flags..................................... disabled
--More-- or (q)uit
show ip ospf interface 2/1
IP address..................................... 10.0.2.2
OSPF admin mode................................ enabled
OSPF area ID................................... 1.1.1.1
Transmit delay................................. 1
Hello interval................................. 10
Dead interval.................................. 40
Re-transmit interval........................... 5
Authentification type.......................... none
OSPF interface type............................ broadcast
Status......................................... not Ready
Designated Router.............................. 0.0.0.0
Backup designated Router....................... 0.0.0.0
State.......................................... down
MTU ignore flag................................ disabled
Metric cost.................................... 1
configure
ip routing
exit
Nehmen Sie die entsprechende Konfiguration auch auf den anderen OSPF-Routern vor.
show ip ospf neighbor brief
Neighbor ID
------------
10.0.2.1
312
Anzeige der Einstellungen für die OSPF-Interface-
Konfiguration.
Wechsel in den Konfigurationsmodus.
Die Routing-Funktion global einschalten.
Wechsel in den Privileged-EXEC-Modus.
Anzeige der OSPF-Adjacencys.
IP Address
Interface
-----------
-----------
10.0.2.1
2/1
State
Dead Time
------
----------
Full
UM Config OCTOPUS3
Release 8.0 09/2019
Werbung
Inhaltsverzeichnis
