Setting The Alarm - SACKit WAKEit S Bedienungsanleitung

Setting the alarm

1 . To enter the alarm menu, press and hold the ALARM button.
2 . Switch the alarm to "On" and press the ENTER button to confirm
3 . Select the time for the alarm to go off.
4 . You can now select the alarm sound. You can chose between ambient nature sounds, a clock ra-
dio alarm or use the FM radio as an alarm sound.
5 . Select what days the alarm is on. You can choose between daily, weekdays, weekends or only
once .
6 . You can now select how many minutes before your alarm, the build in wake-up light will turn on.
You can choose between 5, 10, 15 and 30 minutes before, or choose not to activate the wake-up
light at all by choosing "Off".
7 . Your alarm is now set and a "Saved" message will be displayed.
Now it´s time to go to sleep!
NOTE:
While setting the alarm, you can always press the ALARM button to go back to the last step and re-
set it .
How to turn off an alarm
Before the alarm goes off:
• Enter the alarm menu by pressing the ALARM button. Switch the selected alarm to "Off" and
press the ENTER button to confirm.
When the alarm sound is playing:
• Press the ALARM button to disable the alarm.
• Press any other button to Snooze the alarm.
Clock memory backup
The clock memory backup allows your alarm and clock time settings to be stored for up to a
day when there is a power interruption e .g . power failure . The complete clock radio and display
illumination will be switched off . As soon as the power supply returns, the display will indicate the
correct time
9