Product Setup - SACKit WAKEit S Bedienungsanleitung

PRODUCT SETUP

Here follows a description of the setup of the product. A detailed description of the button's and
functionality can be found at pages 4 to 5.
Preset favorite stations
WAKEit S allows you to store 32 of your favorite FM stations as presets.
1 . Select your desired radio station.
2 . Press the PRESET button to open the empty list from 1-32 and choose any empty position.
3 . Press and hold the ENTER button until the LCD display "stored" in your desired position.
To listen to your favorite stored station:
4 . Press the PRESET button
5 . Select the preset station that you have stored.
6 . When the display shows your desired preset number .
7 . Press the ENTER button to confirm.
NOTE:
If you select a preset which have not been allocated a station, then "Empty" will be displayed.
Pairing a Bluetooth device to the WAKEit S
1 . Switch to Bluetooth mode .
2 . If no device is connected, "pairing" will display on the display.
3 . Go to the Bluetooth settings of your phone/device and ensure Bluetooth is switched on.
4 . Find "WAKEit S" in the bluetooth device list and connect to it.
5 . WAKEit S will emit a confirmation sound as soon as it is paired and a "Connected"message will be
displayed on the screen .
NOTE:
To unpair a device, press and hold the ENTER button. A disconnected sound will be played.
To enter pairing mode again, press and hold the ENTER button, until "pairing" shows up on the dis-
play. You can now pair with a new device.
8