Whispbar K513W Montageanleitung Seite 8
Basisträgersystem
Inhaltsverzeichnis
Verfügbare Sprachen
Verfügbare Sprachen
EN
Fitting Kit
K513W
Place crossbar foot over grubscrews.
Ensure the fixed-point covers sit vertically
in the recess in the pads.
Tighten the red plastic knob. The side with
the nut showing should be facing up.
Ensure the red plastic knob is in the
position shown when fully tightened.
Repeat for all four positions.
8
Inhaltsverzeichnis
