Connecting Usb Devices - i-tec C31FLATDOCKPDPRO Gebrauchsanweisung

9. USB-C Power Delivery Port - for charging the notebook, tablet or smartphone
supporting Power Delivery technology. To this port, you can plug the original
or universal AC power adapter equipped with a USB-C connector to ensure
continuous charging of your notebook, tablet, or smartphone while working.
Disconnecting the USB-C adapter will restart the docking station and will
disconnect and reconnect all connected devices.
10. Connecting cable with USB-C connector - for connecting the docking station to
a notebook, tablet, PC or smartphone with a USB-C port
11. Foldable mobile phone stand
12. USB-A 2.0 port – for connecting of the USB devices – primarily for use with
a mouse or keyboard
NOTICE!
Before plugging in the docking station, make sure you have the latest drivers
for your device and an updated BIOS installed.
Automatic driver installation in WINDOWS / macOS operating systems.
If you need to install LAN, download the latest drivers from our website
www.i-tec.cz/en/ in the "Download" tab of this product.
CONNECTING A HDMI / DISPLAYPORT / VGA MONITOR
The docking station is equipped with 1x HDMI, 1x DisplayPort 4K port and 1x
VGA port for the connection of an external monitor or projector with a HDMI/
DP/ VGA interface. For displaying your images you can use a modern plazma
or LCD monitors and TVs. The graphic chip, which is the heart of the docking
station, supports up to 4K resolution 3840x2160 pixels. Connect the monitor
to the docking station using a high quality HDMI/ DP/ VGA cable. During
installation of an additional monitor the screen of the device can flicker which
is a standard condition.
DisplayPort does not support DP++ and therefore cannot be used to connect
a passive DP-to-HDMI adapter etc.
CONNECTING TO THE LAN
You can use the GLAN RJ-45 port for connecting the Ethernet to a router/
switch/ HUB and to the internet, it supports speeds of 10 / 100 / 1000 Mbps.

CONNECTING USB DEVICES

You can use USB-C 3.1 and USB 3.0 ports for connecting your keyboard, mouse,
external hard drive, printer and other devices or you can use it for connecting a
USB HUB, which will give you more free USB ports. In this case we recommend
using a HUB with an external power source. If the connected device is not
charged or does not work, connect the original / external USB-C power adaptor
to the power connector of the parent notebook / Mac / smartphone / tablet
or USB-C Power Delivery port on the docking station for support of charging.
Manual
ENGLISH | 7