Lilin iMEGAPRO IPR424ESX Schnellinstallationsanleitung Seite 11

Configuring IP Addresses via Web Interface
To change an IP address via web interface, type the default IP
address (192.168.0.200) in the Internet browser and follow the steps
below:
1. Login to the H.264 Full HD IP camera by the default username
"admin" and default password "pass"
2. Click Basic Mode configuration hyperlink.
3. Click Network->General hyperlink.
4. Change the IP address, subnet mask, gateway, or HTTP port for
the IP camera.
5. Click Submit to verify the settings.
Downloaded from www.Manualslib.com manuals search engine
- 8 -