Handicare RiseAtlas450M Gebrauchsanweisung Seite 6

If the desired position for the lift unit is not parallell to the rail the quick trolley release bracket, marked red in Figure 5, can
be adjusted by 45-degree angle intervals.
I. Open the cover by removing the two screws at the top. More detailed information can be find in the service
manual for RiseAtlas450.
II. Release the four screws that hold the top bracket in place. Rotate the quick trolley release bracket into the
desired angle, Figure 6.
III. Mount the top bracket and the covers back to their original position.
6
5; Quick trolley release bracket
Figure 6; Adjusting the
QuickTrolleyReleaseBracket