Matrix Vision BVS CA-GX0 Serie Betriebsanleitung Seite 66

BVS CA - GX0 - _ _ _ _ _ _ - _ _ _ _ _ _ - XAS2
3 PRODUCT DESCRIPTION
3.5.1 Power I/O
www. matrix-vision.com
www.matrix-vision.com
The BVS Industrial Camera is powered via the Power I/O plug which additionally pro-
vides digital I/Os:
•
Four PLC compliant inputs as optocoupler with current limiter (11...24 V)
•
Four outputs as high-side-switches (10...24 V and 700 mA) with direct drive out-
put for high power flash, relays, or actuators
12-pin M12 socket, A-coded
Pin
1
2
3
4
5
6
7
8
9
10
11
12
1
Using POE and an external power supply at the same time, the external power supply
will be treated prioritized.
NOTE
The digital sensor inputs correspond to the guideline concerning
inputs. EN 61131‑2, Type 3.
The maximum load on any output is 700 mA. The load or supply
must be limited accordingly.
Description Function
1
PWR_IN+ 11...25 V power supply
PWR_IN-/GND Ground
DigOut3 Output
Opto DigIn0 Optocoupler input
DigOut2 Output
DigOut0 Output
Opto GND Ground for optocoupler
Opto DigIn2 Optocoupler input
Opto DigIn3 Optocoupler input
+24V_HSD 24 V supply for the high side outputs
Opto DigIn1 Optocoupler input
DigOut1 Output
18