Hoval RS-R RaumThBSFunk Bedienungsanleitung Seite 83

10
11
Your installer can link a custom schedule to cooling and heating
mode. Refer to "Setting up of codes in the installer menu" (code
8® 01
RaumThBSFunk + EKRTETS
Room thermostat
4PW56112-1
Downloaded from www.Manualslib.com
=
7
Press to confirm.
+
Press or
8
end time of this action.
Programming a day is finished
when the end time of the last
scheduled action is set to
You can quickly set the time to
23:59
by pressing
=
9
Press to confirm.
Repeat step 6 till 9 for the next
scheduled actions of this day.
To program the remaining days, repeat above steps. Do
this for all days of the week.
Once
NOTE
programmed actions one by one and no additional
actions can be added.
You can clear a user-defined schedule again by
selecting it (
pressing
appears on the LCD to confirm the schedule is
cleared.
) in the installation manual.
manuals search engine
-
to adjust the
23:59
.
>
.
programmed you
◊1 ◊2
or should be flashing) and then
<
during 10 seconds. "
4 208 862 / 00
can only modify
©¬® ◊1 ©¬® ◊2
" or "
Operation manual
"
14