Time Setting; How To Use The Stopwatch - Vestal ZEPPELIN Bedienungsanleitung

* Before setting the time, check that the chronograph measurement is stopped.
Crown
2. Turn the crown
1. Pull out the crown to the
first click. clockwise until the
previous day's date
appears.
* Do not set the date between 9:00 P.M. and 1 A.M.
Otherwise the day may not change properly. If it is necessary to set the date during that period,
first change the time to any time outside it, set the date and then reset to the correct time.
Zeppelin Instruction Manuals.ind6-7 6-7
Downloaded from www.Manualslib.com

TIME SETTING

3. Pull out the crown to the second 4. Push the crown back in to the
click when the second hand is at the normal position in accordance
12 o'clock position. with a time signal.
It will stop on the spot and advance
the hour and minute hands by
turning the crown.
(check that the 24-hour hand is set
correctly)
* When the crown is at the second
click position. Do not press any
button. Otherwise, the
chronograph hands will move.
4
manuals search engine

HOW TO USE THE STOPWATCH

* The measured time is indicated by the stopwatch hands that move independently
of the center and 24-hour hands.
* The stopwatch can measure up to 60 minutes in seconds.
(Standard measurement)
Ex) 100m race (Press the buttons in following order
START STOP (FINISH)
Stopwatch
minute hand
A
Stopwatch second hand 10 seconds
5
(A) -------- (A) -------- (B) )
RESET
(Reset to "0'00")
A
B
Button (A) *In stopwatch
function Start/Stop
english
5/30/08 4:06:54 PM