Specifications - Intermec SF51 Anleitung

Understanding the Status Light
Color
Steady green
Slow flashing
green
Fast flashing green Battery is charging. A fully discharged battery
Flashing red
Steady red
No light

Specifications

Electrical requirements: x 5V, 6.5A
Operating temperature: 0°C to 35°C (32°F to 95°F)
Storage temperature:
Relative humidity:
Where to Find More Information
To download manuals, go to www.intermec.com. For Product
Support, go to intermec.custhelp.com or call 1-800-755-5505.
6
Downloaded from www.Manualslib.com
Description
Battery is fully charged.
Battery is quick charging. Quick charging occurs
for the first hour that the SF51 is in the charger.
After 1 hour, the battery is charged to
approximately 75% capacity.
charges to 100% capacity in approximately 3
hours.
The battery temperature is too cold or too hot for
the battery to charge. Make sure that the
temperature is from 0°C to 35°C (32°F to 95°F).
The battery is not charging. You need to replace the
battery. For help, contact your local Intermec
service representative.
The charger is not operating. Make sure that the:
• SF51 is correctly seated in the charger.
• power supply is properly connected to the
charger and an AC outlet.
• charging pins on the charger and the battery
contacts on the SF51 are clean. To clean the
contacts, rub them with a pencil eraser and
remove any debris from the eraser.
-20°C to 60°C (-4°F to 140°F)
0% to 95% non-condensing
manuals search engine