Tiiwee Motion Sensor Alarm Bedienungsanleitung Seite 5

Press the Forward or the Back button to choose your
1.
favourite ring tone.
Press the Volume button for 5 seconds until you hear a
2.
low buzzing sound and the LED indicator flashes - you are
now in pairing mode - you now have 5 seconds to activate
the sensor - The receiver will exit the pairing mode after 5
seconds automatically.
Activate the sensor by waving your hand in front
3.
of the sensor. You will hear the selected sound on
the receiver.the receiver. The receiver will vibrate,
and the LED indicator light will flash.
Note: The receiver will remember its settings when it is unplugged.
Finding the right location for the motion sensor
· In an open area, please respect a maximum distance of 75 meters between the
motion sensor and the receiver.
· We recommend mounting the motion sensor at the height of at least 1 meter
above the ground.
· The sensor should be looking towards your home, and it should be covering the
area you would like to observe (see image), to reduce unwanted alarms of
nearby regions and roads.
5